Technical Specifications & Installation Resources
Balcony Inspection Vents
Easily access everything required to specify and incorporate BrandGuard’s Removeable Balcony Inspection Vents. From detailed specification sheets to step-by-step installation instructions, all of these materials are available at your fingertips.
Installation Guides
Engineered for easy installation. Choose BrandGuard Vents.
Whether you’re renovating or building new, BrandGuard’s Ember-Resistant Vents are designed to make the installation process simple. From remodels to ground-up construction, they offer an easy fit for a wide range of residential and commercial applications.
Balcony Vent Installation: New Construction
Developing a new multi-family project in the state of California? Meet CAL Fire building codes, such as SB721 & SB326, by specifying BrandGuard’s Removable Balcony Inspection Vents. Easy to integrate into your plans, they offer a practical solution for both safety and code adherence.
Retrofit Balcony Air Vents with BrandGuard
Stay compliant with local wildfire and safety codes, like SB721 and SB326, by specifying BrandGuard’s Removeable Balcony Inspection Vents.
These vents are designed to attach directly to the exterior underside of balconies, decks, or walkways, providing easy access for required inspections while maintain wildfire protection.
Installation is straightforward – just position the vent over the pre-cut opening, fasten securely, and you’re good to go.
Step 1: Prepare the Opening
Carefully remove the old vent from the underside of the balcony, deck, or walkway, Make sure the existing opening is clean and properly prepared for the new vent. Please note we offer custom sizes as well.
Step 2: Position the Vent
Place the BrandGuard Removeable Balcony Inspection Vent over the existing opening. Ensure it aligns properly and sits flush against the exterior surface for a secure and professional fit.
Step 3: Secure and Seal
Attach the vent using fasteners appropriate for your exterior material. Confirm that the installation allows for easy removal during inspections and apply exterior-grade sealant as needed to meet local building codes and wildfire standards.
Technical Specifications by Size
Compare vent models by size, airflow, material, and compliance ratings to find the right fit for your project.
| Size (W x L) | Model # | Flange | NFVA (Airflow) | Spec Sheets |
|---|---|---|---|---|
| 4” x 60” | CS2011-FF Removable | Flange Front | 59 sq in | Download Spec Sheet |
| CS2011-PG Removable | Stucco / Plaster | 59 sq in | Download Spec Sheet |
CAD and Revit Drawings
Looking to specify BrandGuard Vents into your next project? Access all of our Revit BIM and CAD file downloads instantly! Please complete the form below to access materials.
More information
Frequently Asked Questions
The essential questions, answered.
How do Brandguard Vents™ work?
Home hardening is a critical factor to improve the survivability of structures during wildfires. All homes have vulnerable “point of entry” that must be sealed to avoid hot embers and fire from entering the structure. Home ventilation is essential from an energy saving point of view, however in case of a fire nearby, there is a risk of hot embers finding their way into your attic, basement, garage, etc. BrandGuard has patented a unique system to keep embers from entering your house. Our design consists of multiple line of defense:
- A baffle design which allows air to move freely, but traps embers
- BrandGuard propriety intumescent material, which expand only if high heat and extreme flames are reaching the vents
- Non combustible, metal vents which resist heat and flames
How are Brandguard Vents™ different than standard vents?
BrandGuard Vents resists the intrusion of flame and embers into your attic through the building’s vents, thus protecting your home from dangerous flying embers created by wildfires.
Standard Vents do not offer any protection against flying embers and fire.
Why are baffles better for protection?
Baffles have long been used in commercial kitchens as a way to prevent stovetop fires. We have redesigned them to help keep flames, dangerous burning embers, and radiant heat out of your home during a wildfire. Baffles provide immediate protection during a wildfire from the very first second of exposure.
Another reason baffles are better is because they provide protection from driving rain, snow, and rodents. Our vents have passed stringent driving rain tests in Hurricane labs in Florida keep heavy driving rain out at even 140mph! Rodents are unable to chew or squeeze through our vents like they do with regular mesh vents, making them an excellent option for pest control!
What is an intumescent material?
BrandGuard Vents are equipped with a propriety material (intumescent) which expands in case of fire. The thermally activated strip expands up to 30 times its original thickness, sealing off the vent completely. This is an extreme measure to make sure that fire doesn’t penetrate the home.
Are custom vents/products available?
Yes, BrandGuard Vents will work with you and your needs to create a custom fire prevention vent for your project.
How are the vents installed?
BrandGuard Vents are installed like any traditional vent with the same footprint. Our line of retrofit fire Vents can be easily inserted over existing vents without any damage to the structure. They are held in place by applying appropriate screw fasteners. They can also be installed from inside the attic. Please see our installation instructions.
Still have questions?
Talk to our experts for no-obligation advice and support.